7 quick plumbing fixes you should learn

3 February 2023


The plumbing system in your home can be a tricky thing to tackle. Even seasoned homeowners often scratch their heads when faced with an unexpected issue. Thankfully, plumbing issues don’t have to be so intimidating, some basic quick fixes are within reach for most people, even if you don’t consider yourself handy around the house. It pays off to take time and learn these simple tricks now! Keep reading to discover plumbing quick fixes that everyone should know.


Plumbing Fixes Everyone Should Kow

Finding And Stopping Leaks Quickly

Leaks can be an annoying problem in your home, especially when you’re trying to get quick repairs done. Stopping and finding water leaks quickly is a skill everyone should have up their sleeve for those unexpected times of need. Let’s start with one of the most common problems, a leaky faucet. If you’ve got a leak from your kitchen sink or bathroom basin, chances are it’s either a faulty rubber pipe connector or a worn-out repair sleeve.

To stop this type of leak, start by turning off the main water valve and then disconnecting any copper pipes connected to the fixture. Once disconnected, replace the old parts with new ones using a reliable pipe clamp. Then, go ahead and reattach all the components securely before opening up the main valve again.

Next, let’s cover how to fix those slow-dripping drain valves which can cause extensive damage if left unattended over time. Start by detaching both ends of the drainage tube before taking apart its internal mechanisms until you reach the source of where the leaking is occurring. Replace any corroded pieces with brand-new ones before putting everything back together tightly. Just make sure to turn off both hot water supply lines first!

Fixing A Running Toilet

The first thing to do when fixing a running toilet is to identify where the problem lies. Is it simply air bubbles entering the tank? Or could it be caused by too much toilet tissue getting stuck in the flush valve or faucet stem threads? Check all these areas quickly before moving on to more complex solutions like replacing the entire faucet body.

Next up is making sure there isn’t any negative air pressure present that might cause water flow issues. This could happen if you have recently used flushable wipes or other cleaning products around these areas. Once everything looks okay here, inspect the fill valve for cracks or damage and replace as necessary. Finally, make sure no foreign objects are blocking off the water passage within either part of the toilet itself (the tank and bowl).

If none of these steps seem to help with restoring normal flushing operations, then it may be time to consider replacing certain components entirely or calling in a professional who has experience dealing with such plumbing problems.

Unclogging Toilets

One of the first things you should check when dealing with an overflowing or clogged toilet is your cold water supply. First, shut off the flow of water at the hot water heater, then turn off the cold water valve located near the base of your toilet. In order for this fix, it’s important that all air has been eliminated from both lines before turning them back on again. If done correctly, this should effectively stop any further overflow into your bathroom flooring.

Another common problem arises with older compression-type faucets as well as newer hot water recirculating systems. Oftentimes they are unable to deliver enough pressure to flush out more solid materials like paper towels or other debris found in sink drains. To alleviate this issue, try running hot water until the blockage clears away naturally!

Professional plumbing services 

Replacing Shutoff Valves

Replacing shutoff valves is one of the most important plumbing quick fixes you should learn. It will help you deal with a wide range of common plumbing issues, and is an incredibly helpful skill to have. Shutoff valves control the water flow rate throughout our homes so if they malfunction or become damaged, they need to be replaced quickly before further damage occurs.

The process for replacing a shutoff valve varies depending on its type and where it’s located. Generally speaking, though, it involves shutting off the main water supply first. This helps avoid unnecessary negative pressure building up when dealing with heating elements. Once that’s done, you need to remove the entire faucet from its current location and install a new shutoff valve in place of the old one. This requires careful attention and precise workmanship to make sure everything fits correctly without any leaks or other problems occurring afterward.

Dealing With Leaky Pipe Joints

Preventing leaks in plumbing joints is an important part of any home maintenance routine. Leaks can cause water damage, mold, and other costly repairs. Fortunately, there are a few simple steps that homeowners can take to ensure that their plumbing joints remain leak-free.

The first step is to make sure that all water supply and waste line fittings are properly connected. This means using the right type of fitting for the job and making sure it is securely tightened. It’s also important to use a quality sealant or thread tape on threaded connections to ensure a tight seal.

Additionally, you need to check for any signs of corrosion or wear on the fittings before installation. If any issues are found, they should be addressed immediately before proceeding with the installation. Finally, if possible, it’s best to test the connection by running some water through it before completing the job. By following these simple steps, homeowners can prevent costly leaks in their plumbing joints.

Diagnosing Water Heater Issues

The average homeowner can easily become overwhelmed trying to pinpoint the source of a problem with their hot water supply. After all, there are so many potential causes! From faulty electrical wiring and mineral deposits in the tank to broken thermostats. With each issue presenting its own unique set of challenges, how do you know where to start?

Fortunately, there are some telltale signs that can help narrow down your search for the root cause of any given water heater malfunction. For example, if you’re hearing strange noises coming from inside the unit or if you notice a gradual drop in temperature when showering, then chances are, a key component needs replacing. Additionally, be sure to check your pressure relief valve regularly as this could indicate a potential blockage within the system, which needs to be resolved as soon as possible.

How often should a hot water tank be replaced

Dealing With Clogged Drains

Clogged drains are a common issue that every homeowner eventually has to face. It’s a frustrating problem, often causing water backup and slow drainage. Thankfully, if you learn some simple DIY techniques for dealing with clogs, the task won’t seem so daunting.

Here are 3 quick fixes for clearing blockages:

  • Use a plunger: You’d be amazed at how effective this can be in dislodging drain-clogging materials like hair or soap scum. Just make sure to fill the sink up with enough water to cover the plunger cup before pushing down on it several times. If plunging doesn’t work right away, keep trying until you feel resistance. That should mean that whatever was blocking the pipe is now gone!
  • Use an auger or plumber’s snake: This tool works by snaking its long flexible cable into pipes to break apart stubborn debris. All you have to do is put one end of the auger into your drain opening and crank it back and forth until any obstructions are cleared. Again, don’t stop when it feels easy, continue cranking until there’s significant resistance from the blockage being broken up or pushed through the line.
  • Pour boiling water directly into your sink drain: Hot liquid helps melt away grease buildup which often causes clogs in kitchen sinks and bathroom sinks. While doing this may not always work on its own, it can help loosen things up enough that further remedies become more successful.

Professional Plumbing Services

Although it helps to know how to fix plumbing problems, there are some problems that are just too complex to deal with yourself, which is why Plomberie Pro Drain is here to help. Our professional plumbers are dedicated to solving your plumbing issues as quickly as possible.

Our plumbing services include:


Get in touch with us

© 2020 Droits réservés / Plomberie Pro-drain | Référencement par ProStar SEO